For food materials, Young’s modulus is usually considered valid across which range of strain

Question

BlackTom AI · Accepted Answer

When evaluating the question about the valid strain range for Young's modulus in food materials, we begin by listing all provided options to compare them against typical elastic behavior.
Option 1: '2 - 5%'. This range is relatively high for elastic (linear) elasticity in many food materials; beyond a small strain, many materials exit the linear-elastic region, so 2–5% is generally too large to be considered universally valid for Young's modulus in foods.
Option 2: '0.01 - 0.1%'. This range is very small and represents a highly limited portion of the elastic region. While some precise measurements use very small strains, stating such a narrow window as the standard across foods would be inaccurate because different foods exhibit different elastic limits and reporting conventions.
Option 3: '0.1 - 2%'. This option sits within the typical experimental experience for many foods, where the linear elastic (Hookean) response often holds up to around a fraction of a percent to a couple percent strain, with 0.1–2% commonly cited as the practical range for defining Young's modulus in food materials.
Option 4: '5 - 20%'. This range is well into the large-strain region for many foods, where material behavior shifts away from linear elasticity toward nonlinear or plastic behavior; thus, it is unlikely to be considered the valid range for defining a constant Young's modulus.
To decide, recall that Young's modulus is defined in the linear-elastic portion of the stress-strain curve, and for food materials this linear region is typically limited to about a percent or two of strain, making 0.1–2% a sensible overall range. The other ranges either underestimate the precision required or extend into nonlinear territory where the modulus would no longer be constant.

For food materials, Young’s modulus is usually considered valid across which range of strain单项选择题

类似问题

Given the stress-strain diagram below, if the diagram has its origin at a value of (0.00025, 0) and crosses a point where the stress is 25 ksi and the strain is 0.001, what is the calculated modulus of elasticity?

Calculate the Young's modulus of a 30 MPa concrete with a density 𝜌 = 2400 kg/m3

What was the world's first widely adopted biodiversity policy?

The aim of the Paris Agreement is to ensure that the earth’s preindustrial temperature is not exceeded by more than º Celsius.

The IPCC's mission is to Blank ______.

Why have most international agreements for environmental protection been based on the honor system?

As was exhibited with the Montreal Protocol and the encouragement of reduced CFC production, trade can be an effective tool to compel compliance with international treaties.

The Stockholm Declaration and UNEP were the result of the Blank ______ first conference on the Human Environment in 1972.

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单