A uniform beam of mass 5 kg is hinged to a wall and supported at its outer end by a wire as shown. The outer end supports a 10 kg load, also shown: The tension in the wire is:

Question

BlackTom AI · Accepted Answer

To tackle this problem, focus on rotational equilibrium about the hinged wall.
Option A: 245 N. This would arise if you computed the torque balance as T_y × L = g(5 × L/2 + 10 × L) but used sin(36.9°) = 0.5 instead of the actual value. Since sin(36.9°) is about 0.6, using 0.5 leads to an overestimate of T by a factor of 0.5/0.6, yielding roughly 245 N. This shows a misapplication of the angle or an incorrect trigonometric value.
Option B: 122.5 N. This would occur if you divided the vertical component torque by 2 or forgot to include the angle’s sine properly, or if you canceled L incorrectly. In reality, the vertical component of the tension must balance the total weight torque, which requires dividing by sin(36.9°), not by 2, so 122.5 N is too small for the given geometry.
Option C: "impossible to calculate without knowing the length of the beam." In torque problems of this type, the beam length L cancels out when you equate the torques about the hinge, because every torque term contains L as a factor (W × distance and T_y × L). Thus length is not a missing ingredient here; you can compute T without knowing L.
Option D: 204 N. This result comes from setting the counterclockwise torque by the vertical component of the tension equal to the clockwise torques from the weights. The beam weighs 5g acting at L/2 and the 10 kg load weighs 10g at L, so total weight torque is g(5×L/2 + 10×L) = g×12.5×L. The tension’s vertical component is T sin(36.9°) acting at distance L, giving T sin(36.9°) × L. Equating gives T = g×12.5 / sin(36.9°). With g ≈ 9.8 m/s² and sin(36.9°) ≈ 0.6, T ≈ 9.8×12.5 / 0.6 ≈ 204 N, matching this option.

Overall, options A and B stem from misusing the angle or the torque relation, option C is incorrect because L cancels out in the torque balance for this setup, and option D correctly applies rotational equilibrium to yield about 204 N.

A uniform beam of mass 5 kg is hinged to a wall and supported at its outer end by a wire as shown. The outer end supports a 10 kg load, also shown: The tension in the wire is:单项选择题

类似问题

An object or body is in static equilibrium because the vector sum of all external forces is:

An object rests on an inclined slope. Which of the following statements is true?

An object rests on an inclined slope. Which of the following statements is true?

For the free body diagram shown. What is the magnitude of the force on A, if the object is in equilibrium?

For the free body diagram shown. What is the magnitude of the force on A, if the object is in equilibrium?

Determine the force F required to keep the lever stationary as shown in the figure below. The mass of the object is 30 kg. Assume the gravitational acceleration to be 9.8 m/s2. Provide your answer in N to 4 decimal places.

Question at position 8 An excess of growth hormone (GH) before puberty can result in the development ofgigantism.Graves' disease.acromegaly.pituitary dwarfism.Clear my selection

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单