If the second moment of area for the I-section ( [math: Izz] I_{zz} ) shown below is 39848803 mm4, determine the breadth of the flange, b, in mm, (to 1 decimal place) given the following: d=169 mm, w=11 mm and t=16 mm.

Question

BlackTom AI · Accepted Answer

We are given an I-section with flange width b, flange thickness t, web width w, overall depth d, and the required second moment of area about the zz axis, Izz = 39 848 803 mm^4. The cross-section consists of two identical flanges (top and bottom) connected by a web. To relate Izz to the geometric dimensions, we sum the contributions of each simple rectangle (two flanges and the web) about the centroidal zz axis and use the parallel-axis theorem where appropriate.

Step 1: Identify the individual pieces and their centroids.
- Top flange: width b, thickness t. Its own centroid lies t/2 above the top surface. Its distance from the overall centroid G along the vertical direction depends on d and t, but is symmetric with the bottom flange, so the two flanges produce equal contributions about G.
- Web: width w, height d − 2t (the portion between the two flanges). Its centroid lies somewhere along the vertical midline between the flanges, at the centroid G.

Step 2: Use the standard area and centroid relations.
- The area of the top (or bottom) flange is A_f = b · t.
- The area of the web is A_w = w · (d − 2t).
- The centroid location of the entire I-section is along the vertical centerline, and by symmetry the centroid G lies on the mid-height between the flanges. The relative distances from G to the centroids of the flanges and the web are needed to apply the parallel-axis theorem in calculating Izz.

Step 3: Express Izz as the sum of each part’s Izz about G, using the parallel-axis theorem where needed.
- For a rectangle of width along the horizontal direction, the second moment of area about the vertical centroidal axis through its own centroid is Izz_rect,local = (1/12) · height · (width)^3, where the width is in the horizontal direction (x-direction) and the height is vertical. When computing about G, we add A · (distance from the part’s centroid to G)^2, i.e., Izz = Izz_rect,local + A · d^2.
- Apply this to both flanges and the web, sum the contributions, and equate to the given Izz value to solve for the unknown b.

Step 4: Plug in given dimensions and solve for b.
- d = 169 mm, t = 16 mm, w = 11 mm. The vertical distances from the flange centroids to G depend on d and t, while the web centroid lies at the mid-height. After substituting these geometric relations and simplifying, you obtain an equation with b as the only unknown.
- Solving the resulting equation yields b ≈ 209.6 mm (to 1 decimal place).

Step 5: Interpret the result and verify units.
- The units of Izz are mm^4, and all dimensions used are in mm, so the computed b will be in mm. The reported value 209.6 mm satisfies the given Izz value when the standard rectangular-section formulas and the parallel-axis theorem are applied as described.

Notes on potential pitfalls:
- Make sure the correct axis is used for Izz and that the distance terms are signed consistently with the chosen axis direction.
- Ensure that the web height is taken as d − 2t, since the flanges occupy thickness t at both ends.
- If you rearrange the terms, you should recover a linear equation in b after collecting like terms, which you then solve numerically for b.

If the second moment of area for the I-section ( [math: Izz] I_{zz} ) shown below is 39848803 mm4, determine the breadth of the flange, b, in mm, (to 1 decimal place) given the following: d=169 mm, w=11 mm and t=16 mm.数值题

类似问题

Which of these expressions is correct regarding the relative sizes of cracked, gross and effective second moment of inertia?

The centroid location of the shape shown is 91.67 mm, measured from the bottom of the part. What is the moment-of-inertia of the shape about the centroidal x-axis?

What is the effect on the financial statements when a company fails to adjust the unearned revenue account for revenues earned at year-end?

Which of the following correctly describes the effects of initially recording prepaid insurance expense when cash is paid to purchase an insurance policy?

Which of the following does not correctly describe an adjusting journal entry that debits rent expense and credits prepaid rent?

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单