The tensile strength of paper can be modelled by a normal distribution with a mean of 240kPa and standard deviation
15kPa.

If the paper fails to meet a minimum strength it is discarded as waste. What is the maximum value that can be specified as the minimum strength so that it wastes only 10% of production?

Question

The tensile strength of paper can be modelled by a normal distribution with a mean of 240kPa and standard deviation
15kPa.

If the paper fails to meet a minimum strength it is discarded as waste. What is the maximum value that can be specified as the minimum strength so that it wastes only 10% of production?

BlackTom AI · Accepted Answer

We want the 10th percentile x of a normal distribution N(μ = 240 kPa, σ = 15 kPa), i.e. the cutoff satisfying P(X < x) = 0.10.

1. Relevant knowledge points and concepts
- For a normal random variable X ~ N(μ, σ^2), percentiles are found by standardizing: z = (x − μ)/σ, where z follows the standard normal distribution N(0,1).
- The 10th percentile corresponds to the z-value z0.10 = Φ^{-1}(0.10) ≈ −1.28155 (Φ is the standard normal CDF).

2. Complete reasoning process (step by step)
- Set P(X < x) = 0.10, so Φ((x − μ)/σ) = 0.10.
- Solve for x: (x − μ)/σ = z0.10, so x = μ + z0.10 · σ.

3. Calculations with all intermediate steps
- μ = 240 kPa, σ = 15 kPa.
- z0.10 = Φ^{-1}(0.10) ≈ −1.28155.
- Multiply: z0.10 · σ = (−1.28155) × 15 = −19.22325 kPa.
- Add to mean: x = 240 + (−19.22325) = 220.77675 kPa.
- Round to two decimals: x ≈ 220.78 kPa.

4. Why the correct answer is correct
This x is the value below which 10% of the normally distributed tensile strengths fall. Using the standard normal inverse for 0.10 gives the exact z-score; scaling and shifting by σ and μ yields the corresponding tensile-strength cutoff.

5. Why other choices would be incorrect
Any other numeric choice would not produce P(X < x) = 0.10 when standardized: for example a larger cutoff (closer to the mean) would waste more than 10%; a smaller cutoff would waste less. Only the value computed from z = −1.28155 scaled by σ gives the required 10% tail.

6. Conclusion and confirmation
The maximum minimum strength that wastes only 10% of production is 220.78 kPa, which matches the provided answer.

类似问题

Which of the following statements best captures a core property of the normal distribution?

A normal distribution is a bell-shaped curve with a majority of the cases falling within the Blank ______ of the range.

A bell-shaped probability curve demonstrates a(n) Blank ______ distribution.

The tensile strength of paper can be modelled by a normal distribution with a mean of 240kPa and standard deviation 15kPa. What proportion of paper produced will fail specifications, if the paper must have strength of at least 225kPa?

The tensile strength of paper can be modelled by a normal distribution with a mean of 240kPa and standard deviation 15kPa. What is the probability that the tensile strength will be between 226kPa and 243kPa?

Select the MOST appropriate statement for the population parameters of the Normal distribution shown below

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单