A 150 gm bullet travelling at a speed of 500 m/s hits a block weighing 10 kg and gets embedded in it. The block was initially resting on a frictionless surface and starts moving due to this event. Determine the energy lost in the impact as a percentage of the bullet’s original kinetic energy.

Question

BlackTom AI · Accepted Answer

The problem involves a bullet embedding in a block, so momentum is conserved (no external horizontal forces on the system).

First, calculate the initial kinetic energy of the bullet alone: KE_initial = (1/2) m v^2 = 0.5 × 0.15 kg × (500 m/s)^2 = 0.075 × 250000 = 18750 J. This is the energy available before impact.

Next, use conservation of momentum to find the velocity of the combined mass just after the collision. The bullet’s initial momentum is p = m_bullet × v = 0.15 kg × 500 m/s = 75 kg·m/s. After embedding, the total mass is M_total = m_bullet + m_block = 0.15 kg + 10 kg = 10.15 kg. Let V be the common velocity after collision. Then 75 = 10.15 × V, so V = 75 / 10.15 ≈ 7.38 m/s (approximately).

Now compute the kinetic energy of the system after the impact: KE_final = (1/2) × M_total × V^2 = 0.5 × 10.15 kg × (7.38 m/s)^2. (7.38)^2 ≈ 54.46, so KE_final ≈ 0.5 × 10.15 × 54.46 ≈ 5.075 × 54.46 ≈ 276.6 J. This is the energy retained in motion after the collision.

Determine the energy lost in the impact: ΔKE = KE_initial − KE_final ≈ 18750 − 276.6 ≈ 18473.4 J.

Finally, express this loss as a percentage of the bullet’s original kinetic energy: (ΔKE / KE_initial) × 100% ≈ (18473.4 / 18750) × 100% ≈ 0.9856 × 100% ≈ 98.56%. Rounded to a sensible precision, this is about 98.5%.

Summary of the key ideas:
- Momentum is conserved in the collision process since the surface is frictionless and no external horizontal impulse acts on the bullet+block system.
- The embedding yields a single velocity for the combined mass immediately after impact, found from m_bullet v_bullet = (m_bullet + m_block) V.
- The energy remaining after impact is much smaller than the initial bullet energy, because most of the bullet’s energy goes into deformation, heat, and sound, not motion of the combined mass.
- The computed energy loss percentage aligns with the intended result of about 98.5% of the bullet’s original kinetic energy.

类似问题

The figure shows two train cars that move toward each other, collide, and couple together. How much thermal energy is created in this collision? Figure caption: Before and after diagrams show forces involved in a collision between two train cars.

A 1-kg box is sliding horizontally along a frictionless surface with a speed of 3 m/s. It collides with and sticks to a 2-kg box that is initially at rest. What is the speed of the boxes after the collision?

A truck of mass 2500 kg and a car of mass 1000 kg collide at an intersection as shown on the diagram below. What is the possible path of the vehicles if they lock together at impact?

An impact resulting in the total loss of velocity would be called a perfectly Answer Question 13[input] impact. NOTE: The answer requires a single word and correct spelling. Double check the spelling.

A 5.0-gram bullet is shot vertically into a 1.2-kg block. The bullet penetrates the block and becomes embedded in the block, lifting the block upward by 6.0 cm (see the figure below). Assuming that air resistance is negligible, the initial speed of the bullet is closest to

In Example 11.3, when Bob jumps on the cart, what kind of collision is this?

In Example 11.3, when Bob jumps on the cart, what kind of collision is this?

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单