Part 1Amy Xia's plant is designed to produce 10,00010,000 hammers per day but is limited to making 6,0006,000 hammers per day because of the time needed to change equipment between styles of hammers.Part 2The utilization rate for the plant = [input]enter your response here % (enter your answer as a percentage rounded to two decimal places).

Question

Part 1Amy​ Xia's plant is designed to produce 10,00010,000 hammers per day but is limited to making 6,0006,000 hammers per day because of the time needed to change equipment between styles of hammers.Part 2The utilization rate for the plant​ = [input]enter your response here ​%​ (enter your answer as a percentage rounded to two decimal​ places).

BlackTom AI · Accepted Answer

The problem presents a plant with a designed capacity of 10,000 hammers per day, but actual output is limited to 6,000 per day due to changeover time.

To evaluate utilization, compare actual output to the designed capacity: utilization = (actual output / design capacity) × 100%.

Here, actual output = 6,000 hammers/day and design capacity = 10,000 hammers/day.

Compute the ratio: 6,000 ÷ 10,000 = 0.60.

Convert to a percentage: 0.60 × 100% = 60.00% when rounded to two decimal places.

This reflects how efficiently the plant is using its designed capacity given the downtime/changeover constraint. If the plant could operate at full capacity without changeover delays, utilization would approach 100%; the 60.00% figure indicates a substantial underutilization relative to design capacity due to the stated bottleneck.

Note: There are no answer choices provided in this item, so the calculation steps above demonstrate how to arrive at the numerical value for utilization.

类似问题

Question at position 36 The optimal capacity utilization for a service organization is 100%TrueFalse

Utilization is calculated as the ratio of maximum capacity to actual output rate, expressed as a percentage.

What is the current Capacity Utilization Rate?

Part 1What is efficiency?Part 2 A. 100% utilization B. percentage of design capacity actually used C. effective capacity divided by design capacity D. percentage of effective capacity actually used

Part 1A plant has an effective capacity of 1,0001,000 units per day and produces 920.0920.0 units per day with its product mix. Part 2The plant efficiency = [input]enter your response here % (enter your response as a percentage rounded to one decimal place).

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单