can operate the rudder.

Question

BlackTom AI · Accepted Answer

The question appears to ask which hydraulic system can operate the rudder. 
Option 1: 'Only the A hydraulic system' restricts rudder operation to a single system. If the correct answer is 'Any hydraulic system', this option would be incorrect because it unnecessarily limits functionality to system A. 
Option 2: 'Only the standby system' suggests rudder control is exclusive to a standby unit, which would fail to account for normal operation using other hydraulics. This would be incorrect if the rudder can be actuated by other hydraulics during normal or alternate modes. 
Option 3: 'Only the B hydraulic system' is similar to Option 1 but limits to system B; again, this would be incorrect if other hydraulic systems can also operate the rudder. 
Option 4: 'Any hydraulic system' posits that the rudder can be actuated by any available hydraulic system, which is consistent with designs that provide redundancy and cross-bleed or shared actuation pathways, ensuring rudder control even if one system fails. This understanding aligns with typical aircraft or vessel hydraulic logic where multiple circuits may drive same control surfaces for reliability. 
In evaluating these, the key misconception in the first three choices is assuming exclusive control by a single system or a standby only, whereas redundancy and multiple hyd systems commonly exist to guarantee control. The phrasing of the question as presented suggests the correct concept is that rudder operation is not restricted to a single hydraulic circuit but can be achieved by any available hydraulic system, supporting the choice that reflects full redundancy. 
Therefore, the option stating 'Any hydraulic system' best fits the idea of flexible, redundant actuation of the rudder, while the other options incorrectly impose exclusivity on one system or a standby.

can operate the rudder.单项选择题

类似问题

Leading edge devices can be retracted by the standby hydraulic system

In the event of hydraulic system B failure, the trailing edge flaps .

The alternate brake system is powered by the ______ hydraulic system

Which of the following is not powered by both hydraulic system A and B

Each main hydraulic system has an engine driven pump and an electric pump.

The B 737 has ______ sources of 3000 psi hydraulic pressure

Leading edge devices and trailing edge flaps are normally operated by

What component on the A340-500 provides hydraulic pressure to the Swivel Selector Valve if the primary supply fails?

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单