What transmission medium is used for a wireless access point in a LAN to transmit wireless signals to other devices?

Question

BlackTom AI · Accepted Answer

Wireless access points transmit data over radio‑frequency electromagnetic waves using Wi‑Fi (IEEE 802.11) wireless LAN technology.

1) Relevant knowledge points and concepts
- Wi‑Fi (802.11 family) is the standard wireless LAN transmission medium using radio waves in the 2.4 GHz and 5 GHz bands (and now 6 GHz for Wi‑Fi 6E).  
- Fibre optic cable and UTP cable are wired media that carry light pulses or electrical signals through physical cables.  
- Bluetooth is a separate short‑range wireless protocol (personal area network) different from Wi‑Fi in range, throughput and typical use.

2) Step‑by‑step reasoning
- The pictured device is a wireless router/access point with antennas; such devices broadcast and receive radio signals to and from client devices.  
- Among the options, only “Wi‑Fi” names the wireless LAN radio technology an access point uses.

3) Calculations / intermediate steps (illustrative)
- Wi‑Fi commonly uses 2.4 GHz and 5 GHz bands. Wavelength λ = c / f, where c ≈ 3.0×10^8 m/s:
  - For 2.4 GHz: λ = 3.0×10^8 / 2.4×10^9 ≈ 0.125 m (12.5 cm).
  - For 5 GHz: λ = 3.0×10^8 / 5.0×10^9 = 0.06 m (6 cm).
  These radio wavelengths are consistent with the size and operation of the device’s external antennas.

4) Why the correct answer is correct
- An access point’s primary role is to provide wireless LAN connectivity using Wi‑Fi radio frequencies; that is the transmission medium used to reach client devices without cables.

5) Why the other options are incorrect
- a. Fibre optic cable: wired medium, not used for over‑the‑air wireless transmission.  
- b. UTP cable: also wired (twisted pair), used to connect the access point to the network backbone but not for wireless links to clients.  
- c. Bluetooth: a different wireless protocol for short‑range PANs; access points use Wi‑Fi for LAN wireless access (some devices may also support Bluetooth, but it is not the LAN wireless medium described).

6) Conclusion
This confirms the correct answer is d. Wi‑Fi, which matches the provided answer.

What transmission medium is used for a wireless access point in a LAN to transmit wireless signals to other devices?Single choice

Similar Questions

Identify the following network protocol: The set of rules about how data is transmitted within a wireless local area network.

A wired LAN has been setup that uses ethernet protocol. Which one of the following allows other devices to connect to this LAN wirelessly?

True or False: If someone (wearing ordinary clothing) physically stands between a computer and WAP, the computer will always lose its wireless connection to the network.

Question-05) In the following IEEE 802.11 frame the Address 2 is:

In a wireless LAN, which two components are needed so that wireless clients can connect to a wired network?

In Bluetooth, which device type initiates communication in a piconet?

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler