How many BTU's does it take to heat 9,857 gallons of water from 60 F to 67 F?

Question

BlackTom AI · Accepted Answer

To determine how many BTUs are needed to heat water, we use the formula Q = m × c × ΔT, where
- Q is heat energy in BTUs,
- m is the mass of the water in pounds (lb),
- c is the specific heat capacity of water (about 1 BTU per pound per degree Fahrenheit), and
- ΔT is the change in temperature in degrees Fahrenheit.

Step 1: Convert gallons to pounds. The mass of water per gallon is roughly 8.34–8.345 lb. Using a typical value of 8.345 lb/gal, the total mass is:
Mass m = 9857 gal × 8.345 lb/gal ≈ 82,256.7 lb.

Step 2: Compute the temperature rise. The water rises from 60 °F to 67 °F, so ΔT = 67 − 60 = 7 °F.

Step 3: Multiply to find BTUs. With c ≈ 1 BTU/lb·°F, the required heat is:
Q = m × c × ΔT ≈ 82,256.7 lb × 1 BTU/lb·°F × 7 °F ≈ 575,796.9 BTU.

Step 4: Consider rounding variations. Because the exact pound-per-gallon value for water can vary slightly (commonly taken as 8.34–8.345 lb/gal), the final BTU value will vary a bit. If we use 8.34 lb/gal, m ≈ 82,170 lb and Q ≈ 575,190 BTU. The result can plausibly land around 575,400 BTU when rounded to the nearest hundred or so.

Step 5: Compare with the given numeric result. The provided value (575,420 BTU) falls in line with the above calculations, given typical rounding and the minor differences in the exact conversion factor from gallons to pounds. Any answer in the vicinity (approximately 575,000 BTU) would be considered reasonable depending on the exact density used.

Notes and caveats:
- If a different density value is used (e.g., exactly 8.34 or 8.343 lb/gal), the final BTU will shift slightly, but remain near 575k BTU for this scenario.
- This calculation assumes no heat losses and ideal heating of pure water; real-world systems may require slightly more energy due to inefficiencies.

How many BTU's does it take to heat 9,857 gallons of water from 60 F to 67 F?简答题

类似问题

The thermal behaviour of a material is characterised by the value of its

The thermal behaviour of a material is characterised by the value of its

____________ is the amount of heat required to raise the temperature of 1 gram of a substance 1 degree Celsius.

What is the formula of the energy required to change the temperature?

It is a well-known fact that water has a higher specific heat capacity than iron. Now, consider equal masses of water and iron that are initially in thermal equilibrium. The same amount of heat flow, 300 J, is added to each. Which statement is true?

Temperature of land rises more quickly than that of sea because

Question at position 38 Water will cool ________ land.the same asslower thanfaster than

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单