Which of the following actions are recommended when releasing fluid from the pipette tip into a container? 在将液体从移液器尖端释放到容器时，推荐以下哪些操作？

Question

BlackTom AI · Accepted Answer

Holding the pipette completely vertical minimizes surface contact and ensures the dispensed liquid falls straight out of the tip, so option b is the correct and recommended action.

1) Relevant knowledge points and concepts
- Most common pipettes are air-displacement types with two stops on the plunger: the first stop dispenses the set volume; the second stop (blow-out) expels residual liquid from the tip.  
- Tip orientation affects liquid behavior: a vertical tip directs liquid downwards into the container; an angled tip can cause liquid to run along the outside of the tip or to cling to the inside wall, causing loss and inaccuracy.  
- Tip ejection is for removing the tip, not for dispensing sample; ejecting into a container risks contaminating the contents or producing aerosols.

2) Step-by-step reasoning
- When releasing liquid, you want the fluid to transfer fully and reproducibly into the receiving vessel without splashing, running down the tip exterior, or producing aerosols.  
- Holding the pipette vertically aligns gravity with the tip opening so the drop detaches cleanly and falls into the container; this reduces the chance of liquid clinging to the tip or contacting the container wall in an uncontrolled manner.  
- Pressing the plunger to the second stop is specifically to blow out residual liquid; it is a specific technique used when complete removal of liquid from the tip is required (e.g., with viscous liquids or fixed-volume transfers), but it is not universally recommended as the single action when simply releasing fluid into a container.  
- Releasing the tip with the ejector is unrelated to dispensing and can contaminate the receiver or generate aerosols.

3) Intermediate/technical notes
- No numerical calculations apply; reasoning is procedural and based on pipetting physics and contamination control.

4) Why the correct answer is correct
- Holding the pipette completely vertically ensures accurate, reproducible transfer and minimizes errors due to liquid clinging or splashing. It is a basic best-practice for releasing fluid into a container.

5) Why the other options are incorrect
- a (push to second stop): Not always appropriate as a default; second stop is blow-out and may create aerosols or be unnecessary for routine dispensing.  
- c (push to first stop only): While first stop dispenses the set volume, this alone doesn’t address orientation; the question asks which actions are recommended when releasing fluid — orientation is the primary recommendation.  
- d (hold on a slight angle): Angle increases risk of liquid running down tip or uneven delivery, reducing accuracy.  
- e (push the tip release button): Ejecting the tip is for disposal and can contaminate the container or produce aerosols; it is not a dispensing action.

Conclusion: Holding the pipette completely vertically (option b) is the recommended action. This matches the provided correct answer: b.

Which of the following actions are recommended when releasing fluid from the pipette tip into a container? 在将液体从移液器尖端释放到容器时，推荐以下哪些操作？多项选择题

类似问题

When loading an autopipette with liquid, to which stop do you depress the plunger?

When dispensing liquid from an autopipette, to which stop do you depress the plunger?

When loading an autopipette with liquid, to which stop do you depress the plunger?

Which of the following trees corresponds to a potential parse of the ambiguous sentence below, with correct syntactic categories? Some diagnostics are provided.

Which of the following sentences contain two non-finite verbs? Select all that apply.

Analyze the following sentence: The sentence contains [ Select ] 8 6 5 7 3 4 functional words, [ Select ] 2 3 1 4 5 count nouns, [ Select ] 4 5 2 1 3 mass nouns, and [ Select ] 1 5 2 3 4 adjectives.

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单