Match the following excipients to their purposes 1: Flavours ____ 2: Fillers ____ 3: Lubricants ____ 4: Antiadherents ____ 5: Coatings ____ 6: Disintegrants ____ 7: Sorbents ____ 8: Preservatives ____ 9: Glidants ____ 10: Sweeteners ____ 11: Colours ____ 12: Binders ____匹配题

题目图片
A

increase bulk volume

B

hold ingredients in a tablet together

C

preservation

D

prevent ingredients from clumping together

E

promote powder flow by reducing interparticle friction and cohesion

F

more palatable

G

mask unpleasant tasting API

H

improve appearance

I

reduce adhesion

J

moisture-proofing

K

expand and dissolve when wet, releasing API for absorption

L

protect from deterioration and make large/unpleasant tasting tablets easier to swallow

登录即可查看完整答案

我们收录了全球超50000道真实原题与详细解析,现在登录,立即获得答案。

类似问题

Match the following excipients to their purposes 1: Sorbents ____ 2: Antiadherents ____ 3: Colours ____ 4: Lubricants ____ 5: Fillers ____ 6: Preservatives ____ 7: Glidants ____ 8: Flavours ____ 9: Sweeteners ____ 10: Coatings ____ 11: Disintegrants ____ 12: Binders ____

Match the following excipients to their purposes 1: Colours ____ 2: Flavours ____ 3: Lubricants ____ 4: Glidants ____ 5: Sweeteners ____ 6: Sorbents ____ 7: Fillers ____ 8: Disintegrants ____ 9: Preservatives ____ 10: Coatings ____ 11: Antiadherents ____ 12: Binders ____

The implementation and loading phase of the Database Life Cycle (DBLC) involves _____.

Question textComplete the following protocol table for setting up your standard curve for protein. Remember, each of your standards, except the reagent blank, will be prepared in duplicate in the lab (i..e, you will make up each of these standards twice), giving you 11 standards. When filling in your answers, be careful with your formatting and note the following requirements: for all entries of concentrations, volumes and amounts in this table, include two decimal places (e.g. '1.5') for any decimal numbers less than one, make sure you precede the decimal point with the number zero (i.e. type in '0.2'; not '.2' without the zero) [table] Standard | Concentration of BSA standard | Volume of 20 mg/mL BSA stock solution required (mL) | Volume of 0.05 M NaOH diluent required (mL) | Amount of BSA present (mg) | Volume (mL) 1(reagent blank) | 0 | Answer 1 Question 6 | Answer 2 Question 6 | Answer 3 Question 6 | 0.8 2 | 4 | Answer 4 Question 6 | Answer 5 Question 6 | Answer 6 Question 6 | 0.8 3 | 8 | Answer 7 Question 6 | Answer 8 Question 6 | Answer 9 Question 6 | 0.8 4 | 12 | Answer 10 Question 6 | Answer 11 Question 6 | Answer 12 Question 6 | 0.8 5 | 16 | Answer 13 Question 6 | Answer 14 Question 6 | Answer 15 Question 6 | 0.8 6 | 20 | Answer 16 Question 6 | Answer 17 Question 6 | Answer 18 Question 6 | 0.8 [/table]

更多留学生实用工具

加入我们，立即解锁 海量真题 与 独家解析，让复习快人一步！