For a system design, you have to create a system flowchart. What of the following is the correct order of occurrence in the system flowchart?

Question

BlackTom AI · Accepted Answer

When constructing a system flowchart, you typically start with something the system receives or captures, which is the input. From there, the system performs operations or transformations on that input, which is the processing step. After processing, the results are produced and shown to users or other systems, which is the output. If there is a need to improve or adapt the system, feedback loops can be used to feed information back into the process for adjustments, making the feedback a later stage that can influence future iterations.

Option A: Input, output, process, feedback. This order places output before processing, which is illogical because you cannot have meaningful output without first processing the input. The flow should not reach the output before processing occurs.

Option B: Input, feedback, process, output. Here feedback appears immediately after input, but feedback is typically information about the results or performance that is generated after processing and outputting results, not right after input. This disrupts the natural sequence of transforming input into useful results before considering improvement signals.

Option C: Input, process, output, feedback. This arrangement follows the standard sequence: receive input, perform processing, generate output, and then use feedback to refine future cycles. It reflects a typical control or data flow where feedback depends on the produced output.

Option D: Input, process, feedback, output. Placing feedback before the final output implies that feedback influences the processing or is applied before the results are produced, which is less conventional since feedback is usually provided after observing the output to drive adjustments.

Option E: Feedback, input, output, process. Starting with feedback contradicts the initial dataflow concept, since there is no prior output to base feedback on, and it disrupts the logical ordering of input, processing, and producing results.

In summary, the conventional order in a system flowchart that makes logical sense for a single pass through the system is input → process → output → feedback, which corresponds to Option C.

For a system design, you have to create a system flowchart. What of the following is the correct order of occurrence in the system flowchart?Single choice

Similar Questions

Which ONE of the following thalamic nuclei is targeted by the trigeminothalamic tract?

Which ONE of the following is disinhibited in the direct pathway of the basal ganglia motor loop

30. What is the main purpose of the lecture?

Section FChoose a, b or c as the best answer.29. Which statement is the speaker most likely to agree with?

28. 15-minute neighbourhoods provide residents with inexpensive ____ .

27. ____ % of global car ownership is in the U.S.A.

26. ____ % of American drivers use their cars for all journeys.

Section FQuestions 25 – 28. Complete the following sentences with ONE WORD OR A NUMBER from the lecture. 25. American ____ have built more car spaces than is legally required.

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler