A telecom company needs to connect two cities that are hundreds of kilometers apart with a high-speed internet link. The system requires minimal signal loss over the long distance. Which type of cable is most suitable for this scenario?

Question

BlackTom AI · Accepted Answer

Single-mode fiber carries light in a single propagation mode, which minimizes modal dispersion and yields the lowest attenuation per kilometer—making it ideal for hundreds-of-kilometers links requiring minimal signal loss.

1) Relevant knowledge points and concepts
- Attenuation (dB/km): the loss of signal power per kilometer. Lower is better for long links.
- Modal dispersion: in multi-mode fiber, multiple light modes travel at different speeds, broadening pulses and limiting distance and bandwidth.
- Core size and light source: single-mode fiber has a small core (~8–10 µm) and uses laser sources; multi-mode has larger cores (50–62.5 µm) and typically uses LEDs or VCSELs.
- Practical long-haul systems use single-mode fiber plus optical amplifiers (EDFAs) to span hundreds of km.

2) Step-by-step reasoning
- The requirement is minimal signal loss over hundreds of kilometers. Compare typical attenuation:
  - Single-mode fiber: ≈0.2 dB/km (at 1550 nm).
  - Multi-mode fiber: ≈1.0 dB/km (or more, depending on wavelength and type).
  - Copper/Ethernet: designed for tens to hundreds of meters (Cat6 ≈100 m limit); attenuation over km is prohibitive.
- Evaluate loss over distance (examples):
  - For 100 km: single-mode loss ≈0.2 dB/km × 100 km = 20 dB; multi-mode ≈1.0 dB/km × 100 km = 100 dB.
  - For 300 km: single-mode ≈0.2 × 300 = 60 dB; multi-mode ≈1.0 × 300 = 300 dB.
- 20–60 dB of loss can be managed with optical amplifiers and repeaters; 100–300 dB is essentially unrecoverable without impractical equipment.

3) Intermediate calculation steps shown above confirm orders of magnitude difference.

4) Why single-mode is correct
- Single-mode minimizes modal dispersion and has far lower attenuation per km, allowing high-speed signals to travel much farther between amplifiers. It supports higher bandwidth-distance products and is the industry standard for long-haul telecom links.

5) Why other options are incorrect
- Multi-mode fiber: higher attenuation and modal dispersion limit it to short-to-medium distances (typically <2 km for high speeds).
- Ethernet cable (twisted pair/Cat cables): designed for ~100 m; not suitable for hundreds of km.
- Copper cable (coax or twisted pair): very high loss and electromagnetic interference over long distances; impractical and costly for hundreds of km.

Conclusion: Single-Mode Fiber Optic Cable is the most suitable choice, matching the provided correct answer.

A telecom company needs to connect two cities that are hundreds of kilometers apart with a high-speed internet link. The system requires minimal signal loss over the long distance. Which type of cable is most suitable for this scenario?单项选择题

类似问题

Which of the following types of technologies uses fiber optics to deliver Internet service to consumers?

Question at position 12 Which type of Internet Service Provider is generally considered to be the fastest and most reliable?DSLCableFiber opticSatellite

A project has a required return of 12.6 percent, an initial cash outflow of $42,100, and cash inflows of $16,500 in Year 1, $11,700 in Year 2, and $10,400 in Year 4. What is the net present value?

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单