A rectangular loop of wire with sides 0.255 and 0.410 m lies in a plane perpendicular to a constant magnetic field. The magnetic field has a magnitude of 0.830 T and is directed parallel to the normal of the loop's surface (into the page/screen). In a time of 0.189 s, one-half of the loop is then folded back onto the other half, making the area zero. Determine the magnitude of the average emf induced in the loop.

Question

A rectangular loop of wire with sides 0.255 and 0.410 m lies in a plane perpendicular to a constant magnetic field. The magnetic field has a magnitude of 0.830 T and is directed parallel to the normal of the loop's surface (into the page/screen). In a time of 0.189 s, one-half of the loop is then folded back onto the other half, making the area zero. Determine the magnitude of the average emf induced in the loop.

BlackTom AI · Accepted Answer

Faraday’s law: the induced emf (magnitude) equals the rate of change of magnetic flux, |ε| = |ΔΦ/Δt|.

1) Relevant concepts
- Magnetic flux Φ = B·A·cosθ. Here B = 0.830 T, initial area A = (0.255 m)(0.410 m), and the field is parallel to the loop normal so cosθ = 1.  
- Folding half the loop onto the other half reduces the effective area to zero, so final flux is zero.  
- Average induced emf magnitude = |Φ_final − Φ_initial| / Δt.

2) Step-by-step reasoning and calculations
- Compute initial area: A = 0.255 m × 0.410 m = 0.10455 m^2.
- Initial magnetic flux: Φ_i = B·A = 0.830 T × 0.10455 m^2.
  Calculate: 0.10455 × 0.83 = 0.0867765 Wb (we keep a few extra digits for accuracy).
- Final flux after folding: Φ_f = 0 (area becomes zero).
- Change in flux magnitude: |ΔΦ| = |Φ_f − Φ_i| = |0 − 0.0867765| = 0.0867765 Wb.
- Time interval: Δt = 0.189 s.
- Average induced emf magnitude: |ε| = |ΔΦ| / Δt = 0.0867765 Wb / 0.189 s ≈ 0.4593 V.

3) Rounding and final value
- Rounding to two significant figures consistent with given data gives |ε| ≈ 0.46 V.

4) Why this answer is correct
- The calculation directly applies Faraday’s law using the exact area change to zero; sign (negative in Faraday’s law) only gives direction of induced emf, while the question asks for magnitude.

5) Why other choices are incorrect
- 0.87 V is roughly twice the correct value (would correspond to either twice the flux change or half the time). 1.7 V and 2.11 V are much larger and inconsistent with the computed ΔΦ and Δt. “None of these” is wrong because one option (0.46 V) matches the correct computation.

6) Conclusion
- The magnitude of the average emf induced in the loop is 0.46 V, matching the provided answer.

类似问题

Direction of induced emf in a circuit is in accordance with law of

Whenever magnetic flux linked with a coil changes, induced EMF in circuit will change

Calculate the emf when a coil of 100 turns is subjected to a flux rate of 0.3 tesla/sec.

Doubling the time a loop of wire takes to rotate in an electrical generator produces what effect on the induced EMF, assuming all other factors remain constant?

Doubling the strength of the magnetic field through a loop of wire produces what kind of change on the induced emf, assuming all other factors remain constant?

The figure shows a light bulb connected to a conducting bar that moves to the right with velocity [math: v] in a magnetic field [math: B] directed into the page. The induced emf causes the bulb to glow. If the speed of the bar is increased, what happens to the light bulb?

A 3.6V light bulb is connected to a square loop of wire that measures 69cm per side. The loop is oriented perpendicular to a magnetic field with initial magnitude 2.2T. The magnetic field drops to zero over time Δ t. Find Δ t so that the bulb lights up with the specified potential difference.

The emf induced in a generator is due to the change in:

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单