A 50-turn circular coil (radius = 15 cm) with a total resistance of 4.0 Ω is placed in a uniform magnetic field directed perpendicularly to the plane of the coil. The magnitude of this field varies with time according to B = A sin (αt), where A = 80 mT and α = 50π rad/s. What is the magnitude of the current induced in the coil at t = 20 ms?

Enter Answer in (milli Amps)

Question

A 50-turn circular coil (radius = 15 cm) with a total resistance of 4.0 Ω is placed in a uniform magnetic field directed perpendicularly to the plane of the coil. The magnitude of this field varies with time according to B = A sin (αt), where A = 80 mT and α = 50π rad/s. What is the magnitude of the current induced in the coil at t = 20 ms?

Enter Answer in (milli Amps)

BlackTom AI · Accepted Answer

We start by restating the given quantities and identifying what needs to be calculated. There are N = 50 turns, coil radius r = 0.15 m, so the cross-sectional area is A_loop = π r^2 = π (0.15)^2 = π × 0.0225 ≈ 0.070685 m^2. The coil resistance is R = 4.0 Ω. The external magnetic field is B(t) = A sin(α t) with A = 0.080 T and α = 50π rad/s. The time in question is t = 0.02 s (20 ms).

Step 1: Evaluate the magnetic field and its time rate at t = 0.02 s. Compute the argument α t = (50π)(0.02) = π, so B(t) = 0.080 sin(π) = 0 T. Although the field is momentarily zero, the emf depends on the time rate of change of the flux, not the instantaneous flux value.

Step 2: Compute dB/dt at t = 0.02 s. Since B(t) = A sin(α t), dB/dt = A α cos(α t). With α t = π, cos(π) = -1, so dB/dt = (0.080)(50π)(-1) = -4π ≈ -12.566 T/s.

Step 3: Compute the induced electromotive force (emf) using Faraday’s law. The magnetic flux through one loop is Φ = B A_loop, so dΦ/dt = A_loop dB/dt. The total emf for N turns is ε = -N dΦ/dt = -N A_loop dB/dt. Substituting the values gives ε = -50 × (0.070685 m^2) × (-4π T/s) = 50 × 0.070685 × 4π V ≈ 44.4 V.

Step 4: Determine the induced current magnitude. Ohm’s law for the coil is I = |ε| / R = 44.4 V / 4.0 Ω ≈ 11.1 A. Converting to milliamps, I ≈ 11.1 A × 1000 = 11100 mA.

Final note on units: the problem asks for the current in milliAmps, and the calculation yields approximately 11100 mA at t = 20 ms. The fact that B(t) = 0 at this instant does not imply zero emf, because the emf depends on the time derivative of B, which is nonzero here due to the changing phase of the sinusoid.

类似问题

Direction of induced emf in a circuit is in accordance with law of

Whenever magnetic flux linked with a coil changes, induced EMF in circuit will change

Calculate the emf when a coil of 100 turns is subjected to a flux rate of 0.3 tesla/sec.

Doubling the time a loop of wire takes to rotate in an electrical generator produces what effect on the induced EMF, assuming all other factors remain constant?

Doubling the strength of the magnetic field through a loop of wire produces what kind of change on the induced emf, assuming all other factors remain constant?

The figure shows a light bulb connected to a conducting bar that moves to the right with velocity [math: v] in a magnetic field [math: B] directed into the page. The induced emf causes the bulb to glow. If the speed of the bar is increased, what happens to the light bulb?

A 3.6V light bulb is connected to a square loop of wire that measures 69cm per side. The loop is oriented perpendicular to a magnetic field with initial magnitude 2.2T. The magnetic field drops to zero over time Δ t. Find Δ t so that the bulb lights up with the specified potential difference.

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单