What procedure would be carried out if a nicad battery fails a capacity check? [nicad servicing]

Question

BlackTom AI · Accepted Answer

Deep cycling a NiCd battery is the standard remedial procedure when it fails a capacity check.

1) Relevant concepts
- NiCd batteries can develop voltage depression ("memory") or capacity loss from partial cycling or cell imbalance. Deep cycling (controlled full discharge and recharge) can break down crystalline formations on electrodes and equalize cells, restoring usable capacity in many cases. Routine servicing follows manufacturer charge/discharge rates and cutoff voltages to avoid damage.

2) Step-by-step reasoning/process
- A failed capacity test means the battery delivers less amp-hours than its rated capacity. Before replacing cells, attempt restoration because NiCd chemistry often recovers with deliberate full cycles.
- The typical deep-cycle sequence: fully charge per manufacturer specs, discharge under a controlled load to the recommended cutoff voltage, then fully recharge. Repeat 1–3 times and re-test capacity.

3) Procedure details (intermediate steps)
- Fully charge: apply the recommended charge current (commonly C/10 for 10–14 hours for many NiCd packs) until the charge termination indicator (delta-V, temperature rise, or timer) is reached.
- Controlled discharge: apply a known constant load and record discharge time until the per-cell cutoff (often about 1.0–1.1 V/cell under load) or the pack cutoff is reached. Calculate recovered capacity: Ah = discharge current (A) × discharge time (h). Capacity % = (Ah recovered / rated Ah) × 100.
- Example: a 1000 mAh pack discharged at 0.5 A for 1.4 h yields 0.5 × 1.4 = 0.7 Ah = 700 mAh → 70% of rated capacity.
- Recharge fully and repeat the discharge/charge cycle up to a few times; then perform the formal capacity test.

4) Why this is correct
- Deep cycling addresses the common reversible causes of capacity failure in NiCd packs and is the recommended servicing action before cell replacement.

5) Why other options are incorrect
- Replacing individual cells is premature: many capacity failures are recoverable and full packs are often matched; cell replacement is done only after diagnostic tests confirm a bad cell.
- Discarding the battery due to thermal runaway is inappropriate: NiCd capacity failures do not imply imminent thermal runaway; that risk is more associated with certain lithium chemistries.
- Charging immediately without controlled deep cycling will not restore lost capacity and may mask the problem during testing.

Conclusion: The correct maintenance action is to deep cycle the battery, matching the provided answer.

What procedure would be carried out if a nicad battery fails a capacity check? [nicad servicing]单项选择题

类似问题

How did Egyptian culture and governance change during the Ptolemaic period compared to the pharaonic period?

Name the Supreme Court decision that removed financial constraints on PACs.

Political scientists Joshua Kalla and David Broockman find that senior policy makers made themselves available to _____ between three and four times more often than they did to constituents.

Name the political scientist who argues that parties are designed to serve the needs of ambitious politicians (namely candidates and officeholders).

Name the political scientist who said this famous quote about the problems of pluralism: “The flaw in the pluralist heaven is that the heavenly choir sings with a strong upper-class accent.”

What is the name of the third party candidate in 2000 who was not allowed to participate in the presidential debates? Hint: We watched a video clip with him in class.

E.E. Schattshneider said, "Democracy is ________ save in terms of the parties."

Who was the most recently appointed justice to the Supreme Court?

更多留学生实用工具

智能学习助手

风格化写作助手

论文查重助手

文献引用助手

课堂转译助手

课堂笔记助手

Quiz搜索助手

学校历年真题

智能刷题助手

智能匹配练习

希望你的学习变得更简单