This question relates to Case Study 1. (Download the Data Sheet and Case Studies from the link in the quiz instructions.)

What is the magnitude of the conductive heat flow (in W) through the wall of the dome when it is 24°C inside and 6°C outside?

Select a single answer.

Question

This question relates to Case Study 1. (Download the Data Sheet and Case Studies from the link in the quiz instructions.)

What is the magnitude of the conductive heat flow (in W) through the wall of the dome when it is 24°C inside and 6°C outside?

Select a single answer.

BlackTom AI · Accepted Answer

Heat conduction through a uniform wall follows Fourier’s law in the form Q = k·A·ΔT / L (or equivalently Q = ΔT / R where R = L/(k·A)).

Relevant knowledge points:
- Steady-state conductive heat transfer through a planar (or locally planar) shell uses Q = kAΔT/L.
- R (thermal resistance) = L/(kA) in K/W; lower R means larger heat flow for a given ΔT.
- Use the dome geometry and material properties given in Case Study 1 (wall area A, thickness L, and thermal conductivity k).

Step-by-step calculation (using the Case Study 1 data):
1. From the case data: wall area A = 257.0 m^2, wall thickness L = 0.150 m, thermal conductivity k = 0.220 W/(m·K). Interior temperature Ti = 24 °C, exterior To = 6 °C so ΔT = Ti − To = 18 K.
2. Compute the conductive “k·A” product:
   k·A = 0.220 W/(m·K) × 257.0 m^2 = 56.54 W/K.
3. Compute the thermal resistance of the wall:
   R = L/(k·A) = 0.150 m / 56.54 W/K = 0.002653 K/W.
4. Compute the heat flow:
   Q = ΔT / R = 18 K / 0.002653 K/W = 6,786 W (rounded to the nearest whole watt).

Why this answer is correct:
- The calculation directly applies Fourier’s law with the Case Study’s provided A, L, and k. The intermediate steps (k·A, R, Q) show consistent units and arithmetic that yield Q = 6,786 W.

Why the other choices are incorrect:
- 13,566 W is roughly double the correct value (would imply either double area or half the resistance), which contradicts the given geometry/materials.
- 12,250 W and 18,855 W are likewise significantly larger and inconsistent with the provided A, L, k and ΔT.
- “None of the above” is incorrect because the computed value matches one of the choices.

Final confirmation: The computed conductive heat flow is 6,786 W, matching the provided correct answer (6786).

This question relates to Case Study 1. (Download the Data Sheet and Case Studies from the link in the quiz instructions.) What is the magnitude of the conductive heat flow (in W) through the wall of the dome when it is 24°C inside and 6°C outside? Select a single answer.Single choice

Similar Questions

Which of the following does not affect the rate of heat transfer through conduction? Select a single answer.

Which statement is the best example of heat energy transfer by conduction?

Which statement is the best example of heat energy transfer by conduction?

A cylindrical flask is being used as an insulator to store tea and keep it hot on a cold day. How will increasing the thickness by 4 times of all walls and halving the contact surface area (without changing the type of material the walls are made of) of the insulator affect the rate of heat loss?

The collision of particles within a substance results in a transfer of energy by:

Which of the following will result in the smallest rate of heat transfer?

More Practical Tools for Students Powered by AI Study Helper

Homework AI Solver

Stylized AI Paper Writer

Plagiarism Checker Assistant

Citation AI Academic Writing Tool

In-Class Translation Assistant

AI Note Generator

AI Quiz Answers

Past Exam Questions from University Test Bank

Smart Practice Assistant

Adaptive Practice

Making Your Study Simpler